deutz engine TCD 2013 L4 2V
Water-cooled 4-cylinder in-line engine with turbocharging and charge air cooling.
Original engine record: 96
Source section: Engine catalog
Tell us your power requirement, application, emissions requirements and destination. Our team will confirm the configuration and quotation.
Engine specifications & information
Original website content preserved below. Historical claims and specifications are subject to confirmation.
Water-cooled 4-cylinder in-line engine with turbocharging and charge air cooling.
The powerful DEUTZ Common Rail (DCR®) injection system and the electronic engine control (EMR 4) with intelligent connection to the drive management ensure the best engine performance with low fuel consumption.
Wet cylinder liners, long oil change intervals and the simple change of engine fluids reduce operating costs and increase device availability.
Low noise emissions thanks to acoustically optimized components with high smoothness and durability.
Simple and inexpensive installation due to minimal weight and small installation space.
Air filter and cooling system are fully assembled.
Best cold start capability even under extreme conditions.
The TCD 2013 meets the requirements of EU level IIIA.
| Technical specifications | |
|---|---|
| emission standards | EU IIIA, US T3 |
| number of cylinders | 4 |
| drilling | 108 mm |
| stroke | 130 mm |
| displacement | 4.8 l |
| Typical generator power at 50 Hz / 1500 min -1 | |
| Typical generator power (COP) | 90 kW |
| Typical generator power (PRP) | 95 kW |
| Typical generator power (LTP) | 100 kW |
| Typical generator power at 60 Hz / 1800 min -1 | |
| Typical generator power (COP) | 103 kW |
| Typical generator power (PRP) | 109 kW |
| Typical generator power (LTP) | 114 kW |
| length | 1589 mm |
| width | 880 mm |
| height | 1247 mm |
| Weight | 624 kg |